GDS Technologies - Gas Detection Systems UK & Carbon Monoxide Detectors

Certification	CE – C509
Input voltage – 3 wire device (polarity protected)	12 to 35V DC – 24v DC nominal
Maximum current consumption	130mA
Voltage output 1~5V, maximum current draw	5mA
Resolution	0.15% of span
Output	4~20mA (link selectable as sink or source)
Maximum loop resistance in source mode	250R
Output resolution	0.02mA
Maximum offset drift	± 20uA
Over-range output	21.3mA (typical)
Fail signal	4~20mA reduced to 3mA
Fail indicator	Open collector output to 0V

Ineternal plug in sensor	(NDIR)
Processor and terminal enclosure – material	GRP
Dimensions	122mm x 122mm x 76mm
Weight	0.8Kg
Mounting Entry	Two M5 (145 mm CRS) 45° from vertical
On Board Indicators: -
Green LED	System healthy
Three red LED’s	System diagnostics
Cable Entry	One – 20 mm 1.5 pitch

IP53 + Water Shield IP64

Operating Conditions
0 ~100% RH (non-condensing)
-10 ~ +50°C

Storage Conditions
0~100% RH (non-condensing)
-20 ~ +60°C

Accessories:-
003-040 Collector Cone + universal fitting
003-003 Universal fitting – Test Gas Applicator
Weather Cone
008-312 Flow Block
003-036 Duct Mount Probe

GDS Technologies Ltd
Fusion Point, Ash Lane, Garforth,
Leeds UK LS25 2GA
Tel +44 (0)113 286 0166
Fax +44 (0)113 287 8178
Email sales@gds-technologies.co.uk
www.gds-technologies.co.uk

This document is not contractual and the equipment specification may be modified at any time without prior notice.