Tel: 0113 286 0166
Fax: 0113 287 8178
 
GDS550 Trigger Survey System



GDS550 Trigger Survey System
Light weight portable Boom
Reponse Time <4 Seconds
Supplied with all fittings
High strength case
Function switches illuminated
Fits most vehicles in minutes
Conforms to BG PS/E22
Built in Gastec Charger
Adjustable Up/Down Alarm
Water Trap and Dust Filter
Power socket
Optional internal ppm hydrocarbon detector




The GDS 550 Trigger Survey System is designed to operate in conjuction with a portable flame ionisation detector, collecting and monitoring a continuous representative sample of the atmosphere traversed by the survey vehicle. The system filters unwanted higher hydrocarbons from the sample and provides an audible and visual alarm to methane levels above a pre-set threshold. The GDS 550 is a one man survey system and designed to meet the changing demands and strategies of British Gas Transco and other gas network providers.

The complete system can be fitted to any normal vehicle within a matter of minutes. The lightweight boom is fastened to the front valance, the trigger kit and FID unit being securely retained on the front passenger seat using the vehicle safety belt.

Power to the system is normally picked up through the cigar lighter fitting, resulting a very fast installation and response time to any reported leak or routine survey.

Material
Lightweight structural resin case, Neoprene lid seal, virtually indestructible, large multiple latches, able to be padlocked
Dimensions 340mm x 327mm x 152mm
Weight 4.1 Kg
Operating Temperature Range -10 to +50°C
Humidity 0 to 90% R.H.
Operating Voltage 11.2 to 14.2V DC (Nominal 13.2V)
Power Consumption 18W Maximum






Welcome to GDS | Fixed System Detectors | Flow Sample System Sensors
Portable Gas Detectors | Remote Detection Alarms | Gas Detection Sensors
Hazardous Area Gas Detectors
| Safe Area Gas Detectors
Gas Detection Leakage Survey | Gas Sensor Locations