GDS - Gas Detection Systems and Equipment Technologies Ltd
Home GDS Products Services About Us Technical Data Downloads News/Products Contact Us

Remote Alarms
Status I Indicator Panel
Status II Indicator Panel
20 Way Status Alarm 3
Repeater Panel
Undergoing Technical Updates
Snoop Repeater Panel
Back To Remote Alarms

 

 
 

Status I Indicator Panel
C469
(Remote Alarm Units)


Search


  



The status alarm is a remote module lending itself to a wide variety of warning and alarm applications, the module provides a combined audible and ‘text selectable’ illuminated window indication. The audible sounder may be muted at any time with the visual alarm indicator remaining on until the alarm condition has cleared.

INDICATORS

Safe Green indicator ON
Caution (Low Alarm) Amber indicator
ON - flashing + sounder
Green indicator OFF
Gas (High Alarm) Red indicator
ON - flashing + sounder
Green indicator OFF
Fault Green indicator OFF
Indicators Long life high power LED's
Consumption Maximum power per signal input 1 watt
Option Window text to customer requirements
Size 200 x 120 x 60
Protection IP65
Sounder Mutable 98 dB @ 30cm
Mute bypass option (Jumper from A to B)
Permanent sounder mute-option (remove Jumper JP2)
Remote mute terminals
Outputs Low alrm relay contact S.P.C.O.
(Not resetable until gas signal has cleared)
High alarm relay contacts S.P.C.O.
(Not resetable until gas signal has cleared)
Common alarm relay contacts D.P.C.O.
(Resets when mute button pressed)
Option - not resetable until gas has cleared
All contacts rated 5A @ 230v AC






+-24v DC supply (usually from the Gas Alarm Panel) 6, 7
+24 - High alarm realy signal - 1 ] Gas Alarm Panel
+24 - Low alarm realy signal - 2 ] Gas Alarm Panel
+24 - Fault alarm realy signal - 3 ] Gas Alarm Panel

Note - Signal inputs may be reduced according to requirements ie: HI + Lo (4 wire)





24v DC switched alarm signal from Gas Alarm Panel to (typically Hi input) provides:

Red indicator + sounder (mutable)




Where 24v DC is not available from the Gas Alarm Panel
230v AC 1A supply to the Status Indicator Panel
Select JP1 to provide 24v DC output on DC in terminals (6/7)


Copyright © 2009 GDS Technologies Ltd - Gas Detection Systems and Equipment.