15/30Jwin-F6

Product Overview

The 15/30Jwin-F6 is a safe area ABS flame retardant detector housing with display, designed to allow quick and easy access to its interior.

Features & Benefits

  • Robust and weatherproof
  • Flexible output options
  • Addressable or stand alone
  • Hyper Terminal communications RS232 line data and set up with 232 adapter

Additional Information

PDF Downloads

General Enquiries
Tel. +44 (0) 113 2860166

Email:
admin@gds-technologies.co.uk

Sales Enquiries:
Tel. +44 (0) 113 2878187

Email:
sales@gds-technologies.co.uk

Technical Engineering Advice
Tel. +44 (0) 113 2878184

Email:
admin@gds-technologies.co.uk

15/30Jwin-F6

The 15/30Jwin-F6 is a safe area ABS flame retardant detector housing with display, designed to allow quick and easy access to its interior. The detector is robust and weather-proof with improved response times due to the four mounting spacers allowing increased air movement around the detector these spacers also improve the mounting of the unit particularly on circular pillars typically found in carparks.


Power Supply
15 to 30vDC 24v nominal
Outputs
3 wire – 4~20mA
4 wire – CANbus
Relays (optional)
Low alarm S.P.C.O
High alarm S.P.C.O
Fault alarm S.P.C.O / overrange
Rating 0.5A @30vDC
Inhibit option during servicing
Display
2 line alpha numeric back lit status display:
– gas type
– concentrating units
– alarm levels
– alarm status (low/high/over range)
– sensor ID
Sounder/Relay (optional)
Single relay – low/high alarm selectable
S.P.C.O 0.5A @30vDC
Sounder – not less than 85dB @ 30 cm
Logging
Intervals – variable time
Roll over/stop
Storage – 2,880 readings
Temperature
-15˚C to 55˚C
Humidity
Pellistor-catalytic
0 – 99% RH non condensing


DETECTOR HEAD
Type – F6 Hazardous area use
Data Sheet
Ref C994
Certification
ATEX / IECEX
Ingress Protection
IP63, + Universal fitting IP64
Material
Stainless Steel 316 S16
Weight
35gms
Sensor Type
Pellistor-catalytic:
flammable 0 – 100% LEL – 170mA
Accessories – Optional
Collector Cone + Universal Fitting
Universal Fitting (test gas applicator/spray deflector)
Flow Block
Detector Head Weather Shield


JUNCTION BOX
Type – 15/30J safe area use only
15J – shallow box (S)
30J – deep box (D)
Ingress Protection
IP64
Material
ABS Flame retardent FR40
Lid Screws M4SS
Finish
Signal White RAL 9003
Weight
380gms
Entries
Rear 5-20mm knock outs
Sides, Top, Bottom – not specified
Mounting
Standoffs – M4 or No 8 screws
Drill at (C) when standoffs removed
Conduit box – drill at (A) 4.5mm
Surface mount box – drill at (B) 4.5mm
EU Design No.
01359723-0001

Top Accessories

For a full list of related products available please contact us via email sales@gds-technologies.co.uk