15/30J-win P1
Product Overview
The 15/30J-win P1 is a safe area ABS flame retardant detector housing with display, designed to allow quick and easy access to its interior.
Features & Benefits
- Robust and weatherproof
- Flexible output options
- Addressable or stand alone
- Hyper Terminal communications RS232 line data and set up with 232 adapter
15/30J-win P1 The 15/30J-win P1 is a safe area ABS flame retardant detector housing with display, designed to allow quick and easy access to its interior. The detector is robust and weather-proof with improved response times due to the four mounting spacers allowing increased air movement around the detector these spacers also improve the mounting of the unit particularly on circular pillars typically found in carparks.
Power Supply – 15 to 30vDC 24v nominal
Outputs – 3 wire – 4~20mA
4 wire – CAN bus
Relays (optional)
Low alarm S.P.C.O
High alarm S.P.C.O
Fault alarm S.P.C.O / overrange
Rating 0.5A @30vDC
Inhibit option during servicing
Logging – Addressable sensors only / Intervals – one minute to one hour / Storage – 2,880 readings
Temperature -15˚C to 55˚C
Humidity – 0˚C to 99% RH – non condensing
DETECTOR HEAD – Type – P 1 S afe area use
Ingress Protection – IP63, + U niversal fitting IP65
Material – ABS – black
Sensor Inserts – 4 series
Electrochemical
Infra Red
Semiconductor
Pellistor – Catalytic
PID
Accessories – Optional
Collector Cone + Universal Fitting
Universal Fitting (test gas applicator/spray deflector)
Flow Block
Duct Mount Kit
Detector Head Weather Shield
JUNCTION BOX
Type – 30J Safe area use only
Deep box (D) Shallow Box (S)
Ingress Protection – IP64
Material – ABS Flame retardent FR 40 / Lid Screws M4SS
Finish – Signal White RAL 9003
Weight – 380gms
Entries – Rear 5-20mm knock outs / Sides, Top, Bottom – not specified
Mounting
Standoffs – M4 or N o 8 screws
Drill at (C) when standoffs removed
Conduit box – drill at (A) 4.5mm
Surface mount box – drill at (B) 4.5mm
EU Design No. – 01359723-0001
Top Accessories
P1 Universal Fitting
P1 Watershield
P1 Collector Cone + Universal Fitting
P1 Flow Block
For a full list of related products available please contact us via email sales@gds-technologies.co.uk
GDS Hyper Terminal Download