Available Configuration
GDS GasVac® Range
Product Overview
The GasVac® range (comprising of GasVac®311, 311+, Solo, Solo+, 305, 306, 316) of Gas Sampling Systems are used to provide access to target areas not achievable by conventional gas monitoring systems.
The latest of the GasVac range has been designed specifically for the detection of lighter and heavier than air gases, a leading solution for refrigerant gas detection requirements.
Features & Benefits
- The GasVac® range offers 1-48 sample points dependant on model and monitors up to 8 gas types
- Gas sample can be monitored continuously or sequentially
- Central unit can provide a range of signal outputs for both annunciator and control functions
Additional Information
PDF Downloads
| GasVac Solo | GasVac Solo+ | GasVac 311 | GasVac 305 | GasVac 316 | GasVac 306 | |
|---|---|---|---|---|---|---|
| Sample Points | Single Line | 1-8 | Single Line | 1-48 | 1-33 | 1-20 |
| Measurements | Combustible Gas – LEL, % Vol Toxic Gas – ppm % vol Oxygen – % vol Depletion / Enrichment Refrigerant – ppm |
|||||
| Sensors | 1-5 | 1-4 | 1 | 1-8 | 1-8 | 1-4 |
| Outputs | Analogue – 4~20mA CANbus – GDS Combi system Logging – Intervals, variable time, Roll over / stop Storage – 2880 readings |
Analogue – 4~20mA CANbus – GDS Combi system Logging – Intervals, variable time, Roll over / stop Storage – 2880 readings Dry contacts |
Analogue – 4~20mA CANbus – GDS Combi system Logging – Intervals, variable time, Roll over / stop Storage – 2880 readings Modbus Dry contacts |
|||
| Relays | Flow pump fail – S.P.C.O. Individual sensor alarm relays – optional Low / High / Overrange – Fault S.P.C.O. Cabinet sensor – S.P.C.O – optional Supply fail – S.P.C |
1,2,3 and fault alarm relays – S.P.C.O. normally de-energised – energised option, latched or unlatched Flow Fail S.P.C.O. |
Global Low S.P.C.O. Global High S.P.C.O. Global Fault S.P.C.O. Flow Fail S.P.C.O. Power Fail S.P.C.O. Cabinet Sensor S.P.C.O. |
|||
| Power | 230-115v AC – 24v DC | |||||
| Indication | Power Purge Drain ON Sampling |
Two line alpha numeric back lit display Power – Green LED Alarms 1, 2, 3 – Red LED’s Fault – Amber LED Alarms Inhibit – Amber LED |
System Healthy Main Power Standby Power High Gas Alarm Low Gas Alarm System, Flow, Sensor Fail Comms Fail Skip / Hold Sampling |
|||
| Audible Alarm | – | – | 1, 2, 3 and Fault Alarms – mutable 85dB @ 10cm |
All Alarm Conditions | ||
| Communications | – | Data Link – Data Transfer (option) |
– | odus 2 x RS485 CANbus – Internal Data Link – Data Transfer (option) 4~20Ma Analogue Outputs |
||
| Operating Temperature |
-10°C to +50°C | |||||
| Storage Temperature |
+5°C to +55°C | |||||
| Humidity | 0-95 non condensing | |||||
| Ingress Protection |
IP66 | IP52 | IP63 | |||
| Dimensions | 600 x 600 x 210 | 315W x 265H x 95D | 600W x 800H x 350D | 450W x 640H x 270D | 450W x 400H x 200D | |
| Weight | 25KG | 3.8KG | 65KG | 35KG | 20KG | |
| Sample Tube | 6mm OD 4mm ID Standard Length 50M Option 100M |
8mm OD 6mm ID Max. Length 300M |
6mm OD 4mm ID Max. Length 200M |
|||
| Exhaust Port | 6mm OD | 2/10mm OD | 2/6mm OD | |||
| Enclosure Material |
Mild Steel | |||||
| Colour | Ash Grey BSA01 Powder Coat | |||||
| Standards | – | – | – | EN60945: 2002 Maritime General Requirements | ||
Top Accessories CAN Status Indicator +
The CAN Status Indicator is a versatile device that serves as a local repeater or alarm status indicator. It displays detailed information regarding individual sensor readings and alarms from a selected sensor group. This includes data from various systems such as the Combi, 102, and selected GasVac systems. Datalink Auto Drain Unit 230v AC FA-1 6MM Sample Line Flame Arrestor Micropore Sampling (MPS) Linear Sensing 
GasVac® Sample Intake Module
GDS Hyper Terminal Download