15/30J-win Redline Prime 1 Hydrocarbon

GENERAL DATA
This information relates to the device operating continuously.

Hydrocarbon Sensor
Operation – continuous diffusion NDIR (duel wave-length)
Measuring Range – Standard 0~100% LEL 0~100% Vol
Others available
Accuracy – ± 5% F.S.D
Warm up time to zero – < 20 seconds
Response time to target gas T90 – < 35 seconds
Long term zero drift ± 5% F.S.D
The 4~20mA output provides a fault indication by reducing the output to below 2mA,
with the recovery from fault condition being automatic.

ELECTRICAL DATA
Input voltage – 3 wire device 18 to 35V DC – 24v DC nominal (polarity protected)
Output – 4~20mA (selectable as sink or source)
Fail signal – 4~20mA reduced to 2mA
Maximum current consumption – 130mA
Maximum loop resistance in source mode – 250R
Resolution – 0.15% of span
Output resolution – 0.02mA
Maximum offset drift – ± 20uA
Relays Optional – Low / high / fault alarms S.P.C.O. 0.5A @30v DC

JUNCTION BOX
Type – 30J Safe area use only
Ingress Protection – IP64
Material – ABS Flame retardent FR40 / Lid Screws M4SS
Finish – Signal White RAL 9003
Weight – 380gms
Entries – Rear 5-20mm knock outs / Sides, Top, Bottom – not specified
Mounting
Standoffs – M4 or No 8 screws
Drill at (C) when standoffs removed
Conduit box – drill at (A) 4.5mm
Surface mount box – drill at (B) 4.5mm
EU Design No. – 01359723-000
Environmental Data – IP64 + Water Shield IP65
Operating Conditions – 0 ~100% RH (non-condensing) / -15 ~ +55ºC
Storage Conditions – 0~99% RH non-condensing / -20 ~ +60ºC
Accessories – Optional
Collector Cone + Universal Fitting
Universal Fitting (test gas applicator/spray deflector)
Flow Block
Duct Mount Kit
Detector Head Weather Shield