15/30J-F6
Product Overview
The 15/30J-F6 is a safe area ABS flame retardant detector housing, designed to allow quick and easy access to its interior.
Features & Benefits
- Robust and weatherproof
- Flexible output options
- Addressable or stand alone
- Hyper Terminal communications RS232 line data and set up with 232 adapter
Additional Information
PDF Downloads
15/30J-F6 The 15/30J-F6 is a safe area ABS flame retardant detector housing, designed to allow quick and easy access to its interior. The detector is robust and weather-proof with improved response times due to the four mounting spacers allowing increased air movement around the detector these spacers also improve the mounting of the unit particularly on circular pillars typically found in carparks.
Power Supply – 15 to 30vDC 24v nominal
Outputs
3 wire – 4~20mA
4 wire – CAN bus
Relays (optional)
Low alarm S .P.C.O
High alarm S .P.C.O
Fault alarm S .P.C.O / overrange
Rating 0.5A @30vDC
Inhibit option during servicing
Logging
Addressable sensors only
Intervals – one minute to one hour
Storage – 2,880 readings
Temperature -15˚C to 55˚C
Humidity – 0˚C to 99% RH – non condensing
DETECTOR HEAD
Type – F6 Hazardous area use
Data Sheet – Ref C994
Certification – ATEX / IECEX
Ingress Protection – IP63, + Universal fitting IP64
Material – Stainless Steel 316 S16
Weight – 35gms
Sensor Type – Pellistor-catalytic: flammable 0 – 100% LEL – 170mA
Accessories – Optional
Collector Cone + Universal Fitting
Universal Fitting (test gas applicator/spray deflector)
Flow Block
Detector Head Weather Shield
JUNCTION BOX
Type – 30J S afe area use only
Deep box (D) S hallow B ox (S)
Ingress Protection – IP64
Material – ABS Flame retardent FR 40 / Lid Screws M4SS
Finish – Signal White RAL 9003
Weight – 380gms
Entries – Rear 5-20mm knockouts / Sides, Top, Bottom – not specified
Mounting
Standoffs – M4 or N o 8 screws
Drill at (C) when standoffs removed
Conduit box – drill at (A) 4.5mm
Surface mount box – drill at (B) 4.5mm
EU Design No. – 01359723-0001
Top Accessories
F6 Universal Fitting
F6 Collector Cone + Universal Fitting
F6 Flow Block
For a full list of related products available please contact us via email sales@gds-technologies.co.uk
GDS Hyper Terminal Download