15/30J-P1

Product Overview

The 15/30J-P1 is a safe area ABS flame retardant detector housing, designed to allow quick and easy access to its interior.

Features & Benefits

  • Robust and weatherproof
  • Flexible output options
  • Addressable or stand alone
  • Hyper Terminal communications RS232 line data and set up with 232 adapter

Additional Information

PDF Downloads

General Enquiries Tel. +44 (0) 113 2860166 Email: admin@gds-technologies.co.uk Sales Enquiries: Tel. +44 (0) 113 2878187 Email: sales@gds-technologies.co.uk Technical Engineering Advice Tel. +44 (0) 113 2878184 Email: admin@gds-technologies.co.uk

15/30J-P1

The 15/30J-P1 is a safe area ABS flame retardant detector housing, designed to allow quick and easy access to its interior. The detector is robust and weather-proof with improved response times due to the four mounting spacers allowing increased air movement around the detector these spacers also improve the mounting of the unit particularly on circular pillars typically found in carparks.


Power Supply – 15 to 30vDC 24v nominal
Outputs – 3 wire – 4~20mA
4 wire – CAN bus
Relays (optional)
Low alarm S.P.C.O
High alarm S.P.C.O
Fault alarm S.P.C.O / overrange
Rating 0.5A @30vDC
Inhibit option during servicing
Logging – Addressable sensors only / Intervals – one minute to one hour / Storage – 2,880 readings
Temperature -15˚C to 55˚C
Humidity – 0˚C to 99% RH – non condensing


DETECTOR HEAD – Type – P 1 S afe area use
Ingress Protection – IP63, + U niversal fitting IP65
Material – ABS – black
Sensor Inserts – 4 series
Electrochemical
Infra Red
Semiconductor
Pellistor – Catalytic
PID
Accessories – Optional
Collector Cone + Universal Fitting
Universal Fitting (test gas applicator/spray deflector)
Flow Block
Duct Mount Kit
Detector Head Weather Shield


JUNCTION BOX
Type – 30J Safe area use only
Deep box (D) Shallow Box (S)
Ingress Protection – IP64
Material – ABS Flame retardent FR 40 / Lid Screws M4SS
Finish – Signal White RAL 9003
Weight – 380gms
Entries – Rear 5-20mm knock outs / Sides, Top, Bottom – not specified
Mounting
Standoffs – M4 or N o 8 screws
Drill at (C) when standoffs removed
Conduit box – drill at (A) 4.5mm
Surface mount box – drill at (B) 4.5mm
EU Design No. – 01359723-0001

Top Accessories

P1 Universal Fitting

Downloadable Document

Download

P1 Watershield

Downloadable Document

Download

P1 Collector Cone + Universal Fitting

Downloadable Document

Download

P1 Flow Block

Downloadable Document

Download

For a full list of related products available please contact us via email sales@gds-technologies.co.uk