Redline Prime 4 – Cool Sensor
Product Overview
The Red Line Prime sensor uses proven NDIR principles to detect and monitor the presence of gases. This non poisoning sensing technique relies on the target gas having a unique well-defined absorption signature.
Features & Benefits
- Robust and weatherproof
- CANbus, 4~20mA output
- Addressable or stand alone
- Data logging
- Optional back lit alpha numeric full status display
- Optional 3 selectable alarm relays
- Optional sounder/relay
- Optional pumped aspirated sensor
Additional Information
PDF Downloads
Redline Prime 4 – Cool Sensor The Red Line Prime sensor uses proven NDIR principles to detect and monitor the presence of gases. This non poisoning sensing technique relies on the target gas having a unique well-defined absorption signature. This is used to identify the presence of the target gas and is highly specific. Using a suitable infrared source, an analysis of the optical absorption through the gas allows the concentration of the target gas to be determined. All sensor driving is internal to the transmitter and full fault monitoring of the sensor and transmitter is continuous. This product is available with a range of options.
GENERAL DATA
This information relates to the device operating continuously.
Refrigerant Sensor
Operation – continuous diffusion NDIR (duel wave-length)
Measuring Ranges 0~2000 ppm
Accuracy ± 5% F.S.D
Operating temperature range -20 – +50˚C
Response time to target gas T90 < 30 seconds
Operating humidity range 0-95%
ELECTRICAL DATA
Input voltage – 3 wire device 18 to 35V DC – 24v DC nominal (polarity protected)
Output – 4~20mA (selectable as sink or source)
Fail signal – 4~20mA reduced to 2mA
Maximum current consumption – 130mA
Maximum loop resistance in source mode – 500R
Resolution – <2% of range
Output resolution – 0.02mA
Maximum offset drift – ± 20uA
Logging –
Intervals – variable time
Rollover/stop
Storage – 2880 readings
JUNCTION BOX
Type
Type – 15/30J safe area use only
15J – shallow box (S) basic model
30J – deep box (D) + options
Ingress Protection
IP65
Material
ABS Flame retardent FR40
Lid Screws M4SS
Finish
Signal White RAL 9003
Weight
380gms
Entries
Rear 5-20mm knock outs
Sides, Top, Bottom – not specified
Mounting
Standoffs – M4 or No 8 screws
Drill at (C) when standoffs removed
Conduit box – drill at (A) 4.5mm
Surface mount box – drill at (B) 4.5mm
EU Design No.
01359723-000
Accessories – Optional
Collector Cone + Universal Fitting
Flow Block
Duct Mount Kit
Detector Head Weather Shield
Aspirated Sensor (pump)
Top Accessories
For a full list of related products available please contact us via email sales@gds-technologies.co.uk