XDI-F1 PID

Product Overview

The XDI-F1 PID is an Exd detector housed within our high-grade aluminium alloy casing. Approvals include ATEX and IECEX.

Features & Benefits

Explosion proof
Rugged and reliable
CANbus 4~20mA outputs
Addressable or Stand Alone

Additional Information

PDF Downloads

Datasheet

Product Information

Certification XDIF1

Set Up procedure PID

Installation Guidelines

Connections for Sensors and Panels

Need Help Choosing

General Enquiries
Tel. +44 (0) 113 2860166

Email:
admin@gds-technologies.co.uk

Sales Enquiries:
Tel. +44 (0) 113 2878187

Email:
sales@gds-technologies.co.uk

Technical Engineering Advice
Tel. +44 (0) 113 2878184

Email:
admin@gds-technologies.co.uk

Product Description

XDI-F1 PID

The XDI-F1 PID is an Exd detector housed within our high-grade aluminium alloy casing. The detector can utilise a wide range of sensor cell types offering an unmatched number of gases that may be monitored. Standard 4~20mA signalling with CANbus address enables the sensors to be networked via the GDS Combi control system or customer preferred monitoring systems. Approvals include ATEX and IECEX.

Specification

Certification
Explosion proof ATEX-IECEx
II2G Exd IIC T6-T3 Gb
II2D Extb IIIC T85˚C Db
Power Supply – 15 to 30vDC 24v nominal
Outputs – 3 wire analog 4~20mA / 4 wire CANbus
Optional Relays – Low alarm S.P.C.O / High alarm S.P.C.O / Fault alarm S.P.C.O / overrange
Rating – 0.5A @30vDC
Inhibit option during servicing
Logging – Intervals – one minute to one hour / Storage – 2,880 readings
Housing Material – Copper free aluminium alloy, optional stainless steel
Finish – Chemical resistant epoxy paint, Ral 9003 signal white / Optional – Marine grade finish
Ingress Protection – IP64 + water shield IP65
Cable Entry – 2 x M20 – 1.5 pitch – alternatives 25mm – 3/4 NPT
Weight – 1.6kg
Temperature -15˚C to +55˚C
Humidity – 0 to 99% RH non-condensing