15/30J PID

Product Overview

The 15/30J PID is a safe area ABS flame retardant detector housing, designed to allow quick and easy access to its interior.

Features & Benefits

  • Robust and weatherproof
  • Flexible output options
  • Addressable or stand alone
  • Hyper Terminal communications RS232 line data and set up with 232 adapter

Additional Information

PDF Downloads

General Enquiries Tel. +44 (0) 113 2860166 Email: admin@gds-technologies.co.uk Sales Enquiries: Tel. +44 (0) 113 2878187 Email: sales@gds-technologies.co.uk Technical Engineering Advice Tel. +44 (0) 113 2878184 Email: admin@gds-technologies.co.uk

15/30J PID

The 15/30J PID is a safe area ABS flame retardant detector housing, designed to allow quick and easy access to its interior. The detector is robust and weather-proof with improved response times due to the four mounting spacers allowing increased air movement around the detector these spacers also improve the mounting of the unit particularly on circular pillars typically found in carparks.


Safe Area Detector Head / Junction B ox Assembly Specification Sheet – ref C1506-B

Power Supply – 15 to 30vDC 24v nominal
Outputs – 3 wire – analog 4~20mA / 4 wire – CAN bus
Relays (optional) – Low alarm S .P.C.O 0.5A @30vDC / High alarm S .P.C.O / Fault alarm S.P.C.O / over-range
Inhibit option during servicing – Logging
Intervals – one minute to one hour
Storage – 2,880 readings
Temperature -15˚C to 55˚C
Humidity – 0˚C to 99% RH – non condensing


DETECTOR HEAD
Type – P1 Safe area use only
Ingress Protection – IP64
Material – ABS – Black
Sensor Type – Photoionisation – PID
Target Gases – VOC’s with ionisation potentials <10.6 eV See gas listing G645
Range – Isobutylene 0-200ppm (0-1000ppm max) / Isobutylene 5ppb to 50ppm options
Overrange – Isobutylene 5000ppm
Response Time – T90
Operating Life – Expected 5 years (excluding replaceable lamp and electronic stack – *6 months continuous operation)

Replacement Parts
010-644 PID Bulb*
010-645 PID Electrode Stack
010-646 PID Spring
010-647 PID Extraction Tool


JUNCTION BOX
Type – 30J Safe area use only
Ingress Protection – IP65
Material – ABS Flame retardent FR 40 / Lid Screws M4SS
Finish – Signal W hite RA L 9003
Weight – 380gms
Entries – Rear 5-20mm knock outs / Sides, Top, Bottom – not specified
Mounting – Standoffs – M4 or N o 8 screws / Drill at (C) when standoffs removed / Conduit box – drill at (A) 4.5mm / Surface mount box – drill at (B) 4.5mm
EU Design No. – 01359723-0001

Top Accessories

P1 Universal Fitting

Downloadable Document

Download

P1 Watershield

Downloadable Document

Download

P1 Collector Cone + Universal Fitting

Downloadable Document

Download

P1 Flow Block

Downloadable Document

Download

For a full list of related products available please contact us via email sales@gds-technologies.co.uk