CAN Status Indicator +
Product Overview
The CAN Status Indicator is a versatile device that serves as a local repeater or alarm status indicator. It displays detailed information regarding individual sensor readings and alarms from a selected sensor group. This includes data from various systems such as the Combi, 102, and selected GasVac systems.
Features & Benefits
- Operates directly with sensors or the Combi, GDS102 and selected GasVac® systems
- Selectable modes of operation: Repeater & Status indicator
- 1~45 Panels /system
- 1~64 Sensor grouping
- Traffic light display
- Simple network connection and setup
Additional Information
PDF Downloads
| CAN Status Indicator | |
| Communications | 4 wire addressable CANbus – Combi system |
| Indicators |
Status Indicator Normal – Green display (blue option) Text – SAFE Repeater Mode: Concentration | Gas type | Sensor identification Status – A1 (low alarm) Red screen flashing 1 second + sounder Text – LOW ALARM Status – A2 Status – A3 (overrange alarm) Status – Fault |
| Relays | Four – A1, A2, A3, Fault – menu options SPCO 3A/230vAC Latched or unlatched N/E – N/D Relay off timer |
| Sounder Output | 68dBs @ 1 metre Mutable or permanent isolate option Sounder automatic 10 minute time out option |
| Other | Manual test – indicators, sounder & relays Weight 0.45kg |
| Enclosure | ABS flame retardant FR40 Lid Screws M4–SS Protection – IP64 (weather proof) Finish – Signal White RAL 9003 Entries Base 2 x 20mm knock–outs Rear 5 x 20mm and 2 slot knock–outs Sides/Top not specified Environmental air seal gasket – option |
| Mounting | Stand offs – M4 or No.8 screws Drill at (C) when stand offs removed Conduit box – drill at (A) 4.5mm Surface mount box – drill at (B) 4.5mm Flush mount unit – see document C1840 for dimensions |
| Power Supply | 24v nominal 18v to 30vDC 4W – full alarm status |
Top Accessories
Beacon