• COMBI
  • COMBI BANNER FOOD
  • COMBI BANNER WESTPLANT
  • COMBI BANNER FARMING

COMBI 80 GAS ALARM

COMBI GAS ALARM

The Combi has been designed to operate in the full range of environments from commercial premises through to heavy industrial applications which may require hazardous area sensing.
Typical monitor locations are - public buildings, car parks, tunnels, breweries, boiler plant rooms, water treatment works, H&V control, manufacturing, process plants, horticulture, hotels, offices.

click to download :-

Combi Controller Configuration


Specifications

Sensor points
1-64 addressable ­– CANbus – and/or
16 direct 4~20mA
Measurements
Combustible Gas - L.E.L., % vol
Toxic Gas - ppm, % vol
Oxygen - % vol - Depletion/Enrichment
Refrigerant - ppm
Any 4~20mA transmitter
Indicators - control unit concentration
Dot matrix LCD 4 line 40 character - indicating sensor
location, gas type, (rising or falling alarms), alarm status,
system fault, sensor line fault, sensor fault, inhibit,
real time clock, event memory
Red LED - global alarm, Amber LED - global fault,
Amber LED-inhibit

Outputs
8 user selectable zone/voting – with NE/ND option
and delay to de-energise
Relay contacts - 2 D.P.C.O / 6 S.P.C.O. rated
@ 5A-230v AC
Factory set 1 common low alarm D.P.C.O or group 1
1 common high alarm D.P.C.O or group 2
1 common overange S.P.C.O or group 3
1 common fault alarm S.P.C.O or group 4
4 user selectable S.P.C.O groups 5 to 8
General alarm relay - resetable S.P.C.O. for sounders etc.
Optional - 2 x 32 relays - first 16 programmable
with pattern/event with NE/ND options and delay to
de-energise - 48 are single event
Optional - remote addressable 4 way relay unit
RS232 data log - event log
Modbus - RS485 x2
Combi Soft: full data logging /management tool - option.
Individual sensor logging - intervals 1-60 mins storage
readings 2880
Audible alarm
Alarm/Fault - permanent mute option
Power
230/115v AC or 24v DC ±15%
Control unit 7.5w quiescent 17w full alarm
Sensor - 1.25w
Internal power supply: 20 sensors max. 21+ sensors -
11A/24vDC Auxiliary Power Pack required C1541/C1293



Brochure Downloads

Click to View PDF Document

Combi Combi Soft

Version Changes

 
 
 

Combi Soft Download

Combi Soft

GDS Technologies CombiSoft is primarily data logging software to store readings from a Combi system

on an attached Windows based PC. Used for data acquisition, monitoring and configuration of the Combi 
addressable gas detection system, CombiSoft is a versatile tool for communicating with the GDS panel from
a computer. It allows the user to log unlimited data from all attached sensors on a single Combi system as 
well as control the system including calibration of sensors. 
The software is simple to install on a PC with Windows 7 and requires a single cable connection to the 
Combi panel (USB to serial).

Please ensure your PC is fully updated before the software is installed.

Click here :- 
download our .zip file, unzip the folder to your desktop or folder and run the .exe file to install *Please make a note of your Host ID number* 

For a full Combi Soft user licence, please contact our sales department quoting your Host ID number – sales@gds-technologies.co.uk

GET IN TOUCH

Google Plus RSS Twitter

WANT TO BECOME A DISTRIBUTOR?